Free UGC NET Electronic Science Mock Test 2022 in English

Practice UGC NET Electronic Science Mock Test for Free only On www.examflame.com and take your preparation to the another levelThese Questions are prepared as per the Latest Syllabus of UGC NET Electronic Science 2022 . Practicing mock tests/Test series, you will get an idea about how and which type of Question will ask in the Examination. It also boost your confidence level. Also Solve UGC NET Electronic Science Previous Year Question Paper. And Don’t Forget to Share with Your Friends.

IMG 20220805 232321 668 compress99

UGC NET Electronic Science Mock Test 2022 [Free]


1. The p-n junction diode is a

(A) Passive device

(B) Vacuum device

(C) Unilateral device

(D) Bilateral device


2. A semiconductor has ______ temperature co-efficient of resistance

(A) Zero

(B) Positive

(C) Negative

(D) One


3. A JFET has

(A) One built-in diode

(B) Two built-in diode

(C) Three built-in diode

(D) Four built-in diode


4. The superposition theorem is essentially based on the concept of

(A) Quality

(B) Linearity

(C) Reciprocity

(D) Non-linearity


5. A counter that counts in binary from 0000 to 1010 is known as

(A) Binary counter

(B) Decade counter

(C) BCD counters

(D) Mod-10 counter


6. A digital multiplexer is a/an

(A) Combinational circuit

(B) Sequential circuit

(C) Amplifier

(D) Memory device


7. An 8086 has how many number of flags?

(A) 5

(B) 7

(C) 9

(D) 11


8. In 8085, microprocessor, the register which holds the address of the next instruction to be executed is

(A) Instruction registers

(B) Stack pointer

(C) Temporary register

(D) Program counter


9. The Pentium III processor is a

(A) 16 bit processor

(B) 32 bit processor

(C) 64 bit processor

(D) 128 bit processor


10. Demodulation is a process

(A) Done at the transmitter

(B) Of filtering the carrier

(C) Of removing the sidebands

(D) Similar to modulation


11. The terms frequency pushing and pulling are related to

(A) Reflex Klystron

(B) Two cavity klystron

(C) Pulsed radar system

(D) Magnetron


12. Out of the following memory types, one that is volatile is

(A) Magnetic disc

(B) Ferrite core

(C) Semiconductor ROM

(D) Semiconductor RAM


13. When Q of an antenna increases, the bandwidth

(A) Increases

(B) Decreases

(C) Stays constant equal to zero

(D) Stays constant equal to unity


14. The value of intrinsic-stand-off ratio of UJT should be

(A) >1

(B) <1

(C) 0 (zero)

(D) 10


15. In a normal ECG waveform which wave has the maximum amplitude?

(A) P wave

(B) R wave

(C) Q wave

(D) T wave


16. The output impedance in an ideal Op-Amp is

(A) Zero

(B) 20 Ω

(C) 60 Ω

(D) Infinity


17. What will be the output of the following statements?

int a = 5, b = 2, c = 10, i = a > b

Void main ( )

{print f(“hello”); main ( );}

(A) 1

(B) 2

(C) Infinite number of times

(D) 10


18. Which data communication method is used for sending data in both directions at the same time?

(A) Super duplex

(B) Simplex

(C) Half duplex

(D) Full duplex


19. The highest data rate in fiber optic communication occurs in

(A) Single-mode fiber

(B) Graded-index fiber

(C) Multimode fiber

(D) Co-axial cable


20. Routh’s array for a system is given below:

S4         1          3          5

S        1          2          9

S2         1          5

S1         –3

S0         5

The system is

(A) Stable

(B) Unstable

(C) Marginally stable

(D) Conditionally stable


Assertion-Reason type questions:

The following items consist of two statements, one labelled as ‘Assertion A’ and the other labelled the ‘Reason (R)’. You are to examine these two statements and decide if the Assertion (A) and the Reason (R) are individually true and if so, whether the Reason is a correct explanation of the Assertion. Select your answers to these items using the codes given below and mark your answer sheet accordingly.

Codes:

(A) Both (A) and (R) are true and (R) is the correct explanation of (A).

(B) Both (A) and (R) are true, but (R) is not the correct explanation of (A).

(C) (A) is true and (R) is false.

(D) (A) is false and (R) is true.


21. Assertion (A): In a common base amplifier voltage gain is more than 1.

Reason (R): In a common base amplifier current gain is less than 1.


22. Assertion (A): Op-Amp is used for amplification of weak signals.

Reason (R): To rectify EMG signals, precision rectifiers are used.


23. Assertion (A): Gray is unweighted code.

Reason (R): Gray code is not self-complementary.


24. Assertion (A): TDM and FDM accomplish the same end by different means.

Reason (R): FDM involves simpler instrumentation as compared to TDM.


25. Assertion (A): A SSB system is used for broadcasting applications.

Reason (R): The saving of power in SSB system is ≥ 75%.


26. Assertion (A): Dual slope A/Dconverter is the most preferred conversion technique employed in most of the digital multimeters.

Reason (R): Dual slope A/D converter provides high accuracy while at the same time suppresses the HUM effect on the input signal.


27. Assertion (A): The system of propagation in waveguides is in accordance to field theory.

Reason (R): The system of propagation in transmission line is in accordance with circuit theory.


28. Assertion (A): For a function to be odd f(–x) = –f(x).

Reason (R): If a function is odd, its Fourier series only contains cosine terms.


29. Assertion (A): A number of thyristors operating in parallel cannot share a common heat sink.

Reason (R): For simultaneous firing of the thyristor opto isolators may be employed in the gate driving circuit.


proxy?url=http%3A%2F%2F3.bp.blogspot.com%2F 69iAHB0vW

31. Consider the following devices:

1. RTL

2. High Speed TTL

3. ECL

4. CMOS

The correct sequence of their decrease in power dissipation is

(A) 3, 1, 2, 4

(B) 3, 1, 4 ,2

(C) 1, 3, 2, 4

(D) 3, 2, 4, 1


32. Arrange the following in terms of their increasing conductivity:

1. Copper

2. Steel

3. Leather

4. Rubber

The correct sequence is

(A) 4, 3, 2, 1

(B) 4, 3, 1, 2

(C) 3, 4, 2, 1

(D) 2, 1, 3, 4


33. Following are the EM waves:

1. Red colour light

2. Blue colour light

3. Microwaves

4. X-rays

The correct sequence of decreasing order of wavelength is

(A) 2, 4, 3, 1

(B) 1, 3, 2, 4

(C) 3, 1, 4, 2

(D) 3, 1, 2, 4


34. Following are the process steps to fabricate an IC:

1. Crystal growth

2. Epitaxial growth

3. Photo etching

4. Diffusion

5. Vacuum evaporation of Aluminium

The correct sequence of fabrication is

(A) 1, 5, 3, 4, 2

(B) 1, 2, 3, 4, 5

(C) 1, 3, 2, 4, 5

(D) 1, 2, 4, 3, 5


35. Following are the modulation/ multiplexing techniques:

1. AM

2. FM

3. CDMA

4. WDM

The correct sequence of carrier frequency in decreasing order is

(A) 1, 2, 3, 4

(B) 4, 3, 1, 2

(C) 4, 3, 2, 1

(D) 3, 4, 2, 1


36. Match the following:

List – I                        List – II

a. LED                        i. Heavily doped

b. APD                        ii. Coherent radiation

c. Tunnel diode           iii. Spontaneous emission

d. Laser                       iv. Current gain

The correct sequence is given by

a          b          c          d

(A)       ii          i           iii         iv

(B)       iv         iii         ii          i

(C)       iii         iv         i           ii

(D)       iii         ii          i           iv


37. Match the following:

List – I                                                List – II

a. Cassegrain antenna                          i. Large B.W.

b. Yagi antenna                                   ii. Direction finding

c. Parabolic reflector antenna              iii. Radar

d. Loop antenna                                  iv. Directional transmission

a          b          c          d

(A)       i           iv         ii          iii

(B)       iii         i           iv         ii

(C)       ii          iv         iii         i

(D)       iii         ii          iv         i


38. Match the lists:

List – I                        List – II

(Band gap in eV)        (Materials)

a. 0.67                                     i. Ga As

b. 1.1                           ii. Cadmium sulphate

c. 1.4                           iii. Si

d. 2.4                           iv. Ge

The correct matching order is

a          b          c          d

(A)       iv         iii         i           ii

(B)       iii         ii          i           iv

(C)       iv         i           iii         ii

(D)       ii          iii         i           iv


39. Match the following:

List – I                                                            List – II

a. Voltage series feedback connection            i. increases input impedance

b. Voltage shunts feedback connection          ii. Decreases the input impedance

c. Current series feedback connection            iii. Increases the output impedance

d. Voltage series feedback connection           iv. Decreases the output impedance

The correct matching order is

a          b          c          d

(A)       iv         ii          iii         i

(B)       iv         ii          i           iii

(C)       i           iii         iv         ii

(D)       i           ii          iii         iv


40. Match the following lists:

List – I                                    List – II

a. Electromyogram                  i. Tracing brain waves

b. Electrocardiogram               ii. Tracing of muscular waves

c. Electroencephalogram         iii. Measurement of air in lungs

d. Spirometer                          iv. A record of electrical activity of heart

a          b          c          d

(A)       i           ii          iii         iv

(B)       i           iv         iii         ii

(C)       i           iv         ii          iii

(D)       iv         iii         i           ii


41. Match the following:

List – I                                                List – II

a. Removes ac ripple                           i. Zener diode

b. Supplies ac input voltage                ii. Filter capacitor

c. Constant dc output voltage                         iii. No output voltage

d. Filter choke inductor                      iv. Power transformer

a          b          c          d

(A)       ii          iv         i           iii

(B)       i           iv         iii         ii

(C)       iv         i           ii          iii

(D)       ii          iii         i           iv


42. Match the following lists:

List – I                                    List – II

a. Maxwells bridge                  i. Measurement of unknown inductance

b. Hay’s bridge                       ii. Measurement of high Q of coils

c. Schering’s bridge                iii. Precision measurement of capacitance

d. Weins bridge                       iv. To measure frequency

a          b          c          d

(A)       i           ii          iii         iv

(B)       iv         iii         ii          i

(C)       iv         ii          iii         i

(D)       i           iii         ii          iv


43. Match the following lists:

List – I                        List – II

a. Gamma rays            i. 400-700 nm

b. Visible light             ii. 1-10 cm

c. Radiowaves iii. 3 × 10+3 m

d. Microwaves            iv. 4 × 10–11 m

a          b          c          d

(A)       i           ii          iii         iv

(B)       iv         iii         ii          i

(C)       iv         i           iii         ii

(D)       ii          iii         iv         i


44. Match the List – I and List – II:

List – I                        List – II

(Type of counters)       (No. of flip flops required)

a. Mod-6                     i. 3

b. Mod-11                   ii. 4

c. Mod-31                   iii. 5

a          b          c

(A)       iii         ii          i

(B)       i           ii          iii

(C)       ii          iii         i

(D)       iii         i           ii


45. Match the following lists:

List – I            List – II

(Units)             (Quantity)

a. ps/nm/km     i. Attenuation

b. dB/km         ii. Magnetic field

c. cm2/v-s         iii. Dispersion

d. Tesla            iv. Mobility

a          b          c          d

(A)       iv         i           ii          iii

(B)       iii         i           ii          iv

(C)       iii         i           iv         ii

(D)       i           iv         iii         ii


Read the paragraph and answer the questions 46 to 50:

P-i-n photodiode contains a layer of intrinsic semi-conductor material sandwiched between p-and-n regions. The depletion layer is wholly contained within the i region. Thickness of the intrinsic region can be adjusted to produce device with optimum sensitivity and frequency response. P-i-n photodiode is most common type of depletion layer photodiode.

The other classes of photodiodes, avalanche photodiodes, are reverse-biased p-n junction diodes that are operated at voltages above the breakdown voltage. Current multiplication of electron-hole pairs generated by the incident electromagnetic radiation occurs due to avalanche process. The photo multiplication factor Mpn is defined as ratio of the multiplied photocurrent Ipm to the photocurrent Ipho at voltage below breakdown where no avalanche multiplication takes place.


46. Semiconductors are sensitive to

(A) Heat

(B) Magnetic field

(C) Light energy

(D) All of the above


47. Which of the following elements is a semiconductor?

(A) Germanium

(B) Copper

(C) Carbon

(D) Phosphorous


48. When a reverse bias is applied to a junction diode

(A) Potential barrier is lowered

(B) Majority carrier current is increased

(C) Minority carrier current is increased

(D) Potential barrier is raised


49. Photo-diode is reverse biased because

(A) Only one side is illuminated

(B) Majority swept are reverse biased across the function

(C) Reverse current is small as compared to photo current

(D) Reverse current is large as compared to photocurrent


50. Avalanche photodiodes are preferred over PIN diodes in optical communication systems because of

(A) Speed of operation

(B) Higher sensitivity

(C) Larger bandwidth

(D) Larger power handling capacity

NOTE : – If you need anything else more like e-books, video lectures, syllabus  etc regarding  your Preparation / Examination  then do 📌 mention in the Comment Section below

Hope you like the mock otest given above for UGC NET Electronic Science 2022 . To get more Information about any exam, Previous Question Papers , Study Material, Book PDF, Notes etc for free, do share the post with your friends and Follow and Join us on other Platforms links are given below to get more interesting information, materials like this.

Answer Key (if you find any answer wrong, feel free to comment below)

01.(C)11.(D)21.(A)31.(A)41.(A)
02.(C)12.(D)22.(B)32.(A)42.(A)
03.(B)13.(D)23.(A)33.(D)43.(C)
04.(B)14.(B)24.(C)34.(B)44.(B)
05.(A)15.(B)25.(D)35.(C)45.(C)
06.(A)16.(A)26.(A)36.(C)46.(D)
07.(C)17.(C)27.(B)37.(B)47.(A)
08.(D)18.(D)28.(C)38.(A)48.(D)
09.(C)19.(A)29.(D)39.(D)49.(C)
10.(B)20.(B)30.(C)40.(C)50.(D)

Important Searches & Tags

  • ugc net electronic science mcq with answers pdf
  • ugc net online preparation for electronics science
  • ugc net electronic science topic wise questions
  • ugc net electronic science topper
  • ugc net paper 2 environmental science mock test
  • ugc net important question for electronic science
  • ugc net performing arts mock test
  • ugc net electronic science pdf
  • UGC NET Electronic Science Mock Test
  • UGC NET free Mock Test
  • UGC NET Mock Test Paper 2
  • UGC NET Electronic Science Mock Test in Hindi
  • UGC NET Mock Test Paper
  • UGC NET Paper 1 Mock Test PDF
  • UGC NET Mock Test app
  • UGC NET Mock Test in Hindi

Leave a Comment

close