UGC NET Electronic Science Syllabus PDF 2023 (Latest) download free [English/Hindi]

UGC NET Electronic Science | UGC NET Electronic Science PDF 2023 (Latest) download  | Electronic Science ugc net | UGC NET Electronic Science syllabus pdf | UGC NET Electronic Science latest syllabus | UGC NET Electronic Science syllabus pdf download | UGC NET Electronic Science 2023 syllabus

UGC NET Electronic Science Syllabus PDF 2023 (Latest) download

UGC NET Electronic Science

UGC NET Syllabus 2023: Considering the fact that the syllabus plays a prominent role in boosting up the preparation, we have provided the detailed UGC NET syllabus and exam pattern for 2023Paper-I & Paper-II. The students should prepare accordingly with the updated UGC NET Syllabus 2023 for the subjects they have registered for. In this article, we have provided the complete detail about UGC NET Syllabus & Exam Pattern for your reference. 

UGC NET Syllabus 2023

National Testing Agency had revised the UGC NET Syllabus and in this article we have covered the revised syllabus only. UGC NET exam is conducted in two papers (Paper-I and Paper-II) consisting of multiple-choice questions (MCQs) and all questions are compulsory. Candidates need to complete both papers in a single duration of three hours. To score good marks in the exam, read the detailed syllabus and start your preparation now.

UGC NET Exam Pattern 2023

UGC NET 2023 Examination will be conducted in online mode (Computer Based Test). Before looking into the detailed syllabus of the NTA UGC NET Syllabus 2023, the student must be familiar with the updated UGC NET Exam Pattern 2023, which has been discussed below.

PaperPattern of PaperNumber of QuestionsMarksTotal
Duration
Paper-IThe questions will be generic in nature, intending to assess the teaching/research aptitude of the candidate. 5010003 hours (180 minutes)
Paper-IIThis is based on the subject selected by the candidate and will assess domain knowledge.100200
Total150300

Important Points:
1. For each correct answer the candidate will get 2 marks in both Paper 1 & 2.
2. There is no negative marking for incorrect answers in UGC NET 2023 exam.
3. No marks will be given for questions Unanswered/Marked for Review.
4. All questions are mandatory.
5. If a question is found to be incorrect/ambiguous during the key challenge, the candidate who have attempted the question and chosen one of the correct answers would be given the credit. If there is any dropped question(s), marks will be awarded to all the candidates.

UGC NET Syllabus 2023

The first step of preparing for UGC NET is to be familiar with the UGC NET syllabus as this helps the aspirants to strategise their preparations in a well-defined manner. UGC NET 2023 exam will consist of 2 papers (Paper 1 & Paper 2), the UGC NET Paper 1 will be a common paper for all candidates while Paper 2 will be based on the subject selected by the candidate. Let’s have a look at the detailed UGC NET Syllabus for UGC NET 2023 Exam

UGC NET Syllabus for Paper 1

The UGC NET syllabus for Paper 1 consists of the subjects that will be helpful in analysing the candidate’s teaching and research ability, cognitive abilities, general awareness about teaching and learning processes in the higher education system. The detailed syllabus and UGC NET Paper-1 Syllabus PDF file link have been provided below:

Unit-I: Teaching Aptitude Syllabus

Teaching: Concept, Objectives, Levels of teaching (Memory, Understanding and Reflective), Characteristics and basic requirements.

Learner’s characteristics: Characteristics of adolescent and adult learners (Academic, Social, Emotional and Cognitive), Individual differences.

Factors affecting teaching related to Teacher, Learner, Support material, Instructional facilities, Learning environment and Institution.

Methods of teaching in Institutions of higher learning: Teacher centred vs. Learner-centred methods; offline vs. Online methods (Swayam, Swayamprabha, MOOCs etc.).

Teaching Support System: Traditional, Modern and ICT based.

Evaluation Systems: Elements and Types of evaluation, Evaluation in Choice Based Credit System in Higher education, Computer-based testing, Innovations in evaluation systems.

Unit-II: Research Aptitude Syllabus

Research: Meaning, Types, and Characteristics, Positivism and Postpositivistic approach to research.

Methods of Research: Experimental, Descriptive, Historical, Qualitative and Quantitative Methods, Steps of Research.

Thesis and Article writing: Format and styles of referencing.

Application of ICT in research.

Research ethics.

Unit-III Comprehension Syllabus

A passage of text is given. Questions are asked from the passage to be answered.

Unit-IV: Communication

Communication: Meaning, types and characteristics of communication.

Effective communication: Verbal and Non-verbal, Inter-Cultural and group communications, Classroom communication.

Barriers to effective communication.

Mass-Media and Society.

Unit-V: Mathematical Reasoning and Aptitude Syllabus

Types of reasoning.

Number series, Letter series, Codes and Relationships.

Mathematical Aptitude (Fraction, Time & Distance, Ratio, Proportion and Percentage, Profit and Loss, Interest and Discounting, Averages etc.).

Unit-VI: Logical Reasoning Syllabus

Understanding the structure of arguments: argument forms, the structure of categorical propositions, Mood and Figure, Formal and Informal fallacies, Uses of language, Connotations and denotations of terms, Classical square of opposition.

Evaluating and distinguishing deductive and inductive reasoning.

Analogies.

Venn diagram: Simple and multiple uses for establishing the validity of arguments.

Indian Logic: Means of knowledge.

Pramanas: Pratyaksha (Perception), Anumana (Inference), Upamana (Comparison), Shabda (Verbal testimony), Arthapatti (Implication) and Anupalabddhi (Non-apprehension).

Structure and kinds of Anumana (inference), Vyapti (invariable relation), Hetvabhasas (fallacies of inference).

Unit-VII: Data Interpretation Syllabus

Sources, acquisition and classification of Data.

Quantitative and Qualitative Data.

Graphical representation (Bar-chart, Histograms, Pie-chart, Table-chart and Line-chart) and mapping of Data.

Data Interpretation.

Data and Governance.

Unit-VIII: Information and Communication Technology (ICT) Syllabus

ICT: General abbreviations and terminology.

Basics of the Internet, Intranet, E-mail, Audio and Video-conferencing.

Digital initiatives in higher education.

ICT and Governance.

Unit-IX: People, Development and Environment Syllabus

Development and environment: Millennium development and Sustainable development goals.

Human and environment interaction: Anthropogenic activities and their impacts on the environment.

Environmental issues: Local, Regional and Global; Air pollution, Water pollution, Soil pollution, Noise pollution, Waste (solid, liquid, biomedical, hazardous, electronic), Climate change and its Socio-Economic and Political dimensions.

Impacts of pollutants on human health.

Natural and energy resources: Solar, Wind, Soil, Hydro, Geothermal, Biomass, Nuclear and Forests.

Natural hazards and disasters: Mitigation strategies.

Environmental Protection Act (1986), National Action Plan on Climate Change, International agreements/efforts -Montreal Protocol, Rio Summit, Convention on Biodiversity, Kyoto Protocol, Paris Agreement, International Solar Alliance.

Unit-X: Higher Education System Syllabus

Institutions of higher learning and education in ancient India.

Evolution of higher learning and research in Post Independence India.

Oriental, Conventional and Non-conventional learning programmes in India.

Professional, Technical and Skill-Based education.

Value education and environmental education.

Policies, Governance, and Administration.

NOTE: (i) Five questions each carrying 2 marks are to be set from each Module.
(ii) Whenever graphical/pictorial question(s) are set for sighted candidates, a passage followed by an equal number of questions and weightage be set for visually impaired candidates.

UGC NET Electronic Science Syllabus

Let’s look at the Chapter-wise Syllabus of UGC NET Electronic Science Subject in detail:

Unit 1: Semiconductor

Unit-1 Chapters
Introduction to Semiconductor, energy bands in solids, concept of effective mass, density of states, Fermi levels. PN Junction, Diode equation and diode equivalent circuit, Breakdown in diodes, Zener diode, Tunnel diode, Metal semiconductor junction – Ohmic and Schottky contacts, Characteristics and equivalent circuits of JFET, MOSFET. Low dimensional semiconductor devices – quantum wells, quantum wires, quantum dots. High Electron Mobility Transistor (HEMT), Solar cells – I-V characteristics, fill factor and efficiency, LED, LCD and flexible display devices.Emerging materials for future Devices: Graphene, Carbon Nano tubes (CNT), ZnO, SiC etc.

Unit 2: Fabrication

Unit-2 Chapters
IC fabrication – crystal growth, epitaxy, oxidation, lithography, doping, etching, isolation methods, metallization, bonding, Thin film deposition and characterization Techniques: XRD, TEM, SEM, EDX, Thin film active and passive devices, MOS technology and VLSI, scaling of MOS devices, NMOS and CMOS structures and fabrication, Characteristics of MOS transistors and threshold voltage, NMOS and CMOS inverters, Charge-Coupled Device (CCD) – structure, charge storage and transfer, Basics of VLSI design, stick diagrams, Layout design rules.

Unit 3: Network & Digital Signal Processing

Unit-3 Chapters
Superposition, Thevenin, Norton and Maximum Power Transfer Theorems, Network elements, Network graphs, Nodal and Mesh analysis. Laplace Transform, Fourier Transform and Z-transform. Time and frequency domain response, Passive filters, Two-port Network Parameters : Z, Y, ABCD and h parameters, Transfer functions, Signal representation, State variable method of circuit analysis, AC circuit analysis, Transient analysis, Zero and Poles, Bode Plots.Continuous time signals, Fourier Series and Fourier transform representations, Sampling theorem and applications, Discrete time signal, Discrete Fourier transform (DFT), Fast Fourier transform (FFT), Basic concepts of digital signal processing, digital filters – IIR, FIR.

Unit 4: Voltage & Frequency

Unit-4 Chapters
Rectifiers, Voltage regulated ICs and regulated power supply, Biasing of Bipolar junction transistors and FETs, operating point and stability, Amplifiers, Classification of amplifiers, Concept of feedback, Hartley, Colpitt’s and Phase Shift oscillators, Operational amplifiers (OPAMP) – characteristics, computational applications, comparators, Schmitt trigger, Instrumentation amplifiers, wave shaping circuits, Phase locked loops, Active filters, Multivibrators, Voltage to frequency convertors (V/F), frequency to voltage convertors (F/V).

Unit 5: Logic Families

Unit-5 Chapters
Logic Families, Logic Gates, Boolean algebra and minimization techniques, Combinational circuits, Programmable Logic Devices (PLD), CPLD, flip-flops, memories, Sequential Circuits: Counters – Ring, Ripple, Synchronous, Asynchronous, Shift registers, multiplexers and demultiplexers, A/D and D/A converters, Analysis and Design of fundamental mode state machines: State variables, State table and State diagram. Sequential PLD, FPGA, Analysis and Design of digital circuits using HDL.

Unit 6: Microprocessor & Microcontroller

Unit-6 Chapters
Introduction of Microprocessor 8086: Architecture, Addressing modes, instruction set, interrupts, Programming, Memory and I/O interfacing. Introduction of Microcontrollers – 8051 for embedded systems, Architecture and register set of Microcontroller 8051, Addressing modes, Instruction set of 8051 – Data transfer instructions, Arithmetic instructions, Logic instructions, bit level and byte level control transfer instructions, 8051 assembly programming – stack operations, subroutines, interrupts, 8051 programming as timer/counter, 8051 serial communication, 8051 interfacing RS232, LED/LCD display, Keyboard , Stepper motor.

Unit 7: Electrostatics & Magnetostatics

Unit-7 Chapters
Electrostatics – vector calculus, Gauss’s Law, Laplace and Poisson’s equations, Magnetostatics – Biot Savert’s law, Ampere’s law and electromagnetic induction, Maxwell’s equations and wave equations, Plane wave propagation in free space, dielectrics and conductors, Poynting theorem, Reflection and refraction, polarization, interference, coherence and diffraction, Transmission lines and waveguides – line equations, impedance, reflections and voltage standing wave ratio, rectangular waveguides. Antennas – retarded potential and Hertzian dipole, half wave antenna, antenna patterns, radiation intensity, gain, effective area and Frii’s free space receiver power equation.Microwave Sources and Devices -Reflex Klystron, Magnetron, TWT, Gunn diode, IMPATT diode,Crystal Detector and PIN diode.Radar – block diagram of Radar, frequencies and power used, Radar range equation.

Unit 8: Analog & Digital Modulation and Demodulation

Unit-8 Chapters
Analog modulation and demodulation – AM, FM and PM, Principle of super heterodyne receiver, Random signals, noise, noise temperature and noise figure, Basic concepts of information theory, Error detection and correction, Digital modulation and demodulation – PCM, ASK, FSK, PSK, BPSK, QPSK and QAM, Time and Frequency-Division Multiplexing, Multiple Access techniques, Data Communications – Modems, Codes, Principles of Mobile and Satellite Communication, Optical communication, Optical sources – LED, spontaneous and stimulated emission, semiconductor Lasers, Detectors – PIN photodiodes, Avalanche photodiodes (APD), Optical fibers – attenuation and dispersion characteristics, Bandwidth, Wavelength division multiplexing.Fundamentals of Internet of Things (IoT) for communication.

Unit 9: Power Devices & Supply

Unit-9 Chapters
Power devices – characteristics of SCR, DIAC, TRIAC, power transistors, Protection of thyristors against over voltage and over current. SCR triggering – dv/dt and di/dt, triggering with single pulse and train of pulses, A.C. and D.C. motors – construction and speed control. Switched Mode Power Supply (SMPS).Uninterrupted Power Supply (UPS).Open loop and closed loop control system, Block Diagram reduction techniques, transfer function and signal flow diagram, Stability criterion: Routh-Hurwitz and Nyquist plot, On-off controller, Proportional (P), Proportional-Integral (PI), Proportional-Derivative (PD), PID controllers.

Unit 10: Measuring Equipments

Unit-10 Chapters
Transducers – Resistance, Inductance, Capacitance, Piezoelectric, Thermoelectric, Hall effect, Photoelectric, Measurement of displacement, velocity, acceleration, force, torque, strain, temperature, pressure, flow, humidity, thickness, pH. Measuring Equipment – Measurement of R, L and C, Bridge and Potentiometers, voltage, current, power, energy, frequency/time, phase, Digital Multimeters, CRO, Digital Storage Oscilloscope, Spectrum Analyzer., Biomedical Instruments – ECG, EEG, Blood Pressure Measurements, MEMS and its applications Sensors for IoT applications.

DOWNLOAD CSIR NET Syllabus 2023 (Latest) Pdf

SubjectsCSIR NET Syllabus PDF Download Link
Chemical SciencesDownload Here
Earth SciencesDownload Here
Life SciencesDownload Here
Mathematical SciencesDownload Here
Physical ScienceDownload Here

Leave a Comment

close